Products > Cured Products > Tapes: Electrical - Industrial / Aviation / Military
Equivalent OEM Silicone Rubber Self Fusing Electrical Tape - Part 1
Silicone Rubber Self Fusing Electrical Tape meeting A-A-59163 / MIL-I-46852 & MIL-I-22444 Specifications
Equivalent OEM Silicone Rubber Self Fusing Electrical Tape - Part 1
-65°F to +500°F / -54°C to +260°C Continuous Exposure: Higher Intermittent
FlameShield™ rectangular (Type I) and triangular (Type II) profile silicone rubber self-fusing self-amalgamating compression tapes meeting various OEM manufacturer's and A-A-59163, Mil-I-46852 or Mil-I-22444 specification are used for a variety of critical electrical wiring and cable splicing and protection jobs. Especially suited for aviation and marine environments, as well as outdoor weathering environments.
The tape has no adhesive, but sticks to itself (self-fuses or self amalgamating) when stretched and wrapped onto itself. The tapes starts curing within minutes, and after several hours cannot be unwound or removed without using a sharp knife or blade. This tape makes a waterproof, weatherproof and air tight protection.
This tape is available in oxide-red and black colors - other colors are custom run. The triangular tape has a guideline stripe in the center which aids in achieving a 50% spiral wrap. Triangular levelwrap tapes provide a smooth surface on spiral wrapping, preventing the tape wrap area from snagging when pulling a wire or cable through a bundle or over objects or openings.
FlameShield™ tapes meeting A-A-59163, Mil-I-46852 and Mil-I-22444 provide superior electrical insulation with a minimum of 300 volts per mil (.001") of tape thickness at 365°F / 180°C. A 20mil tape therefore provides 6000 volts per wrap of insulation value. This tape is also used to wrap hydraulic connections and to make vibration resistant bumpers and spacers for wiring, cable, hose, pipes and lines. This tape is used to wrap and hold insulation in place on hot air ducts.
Links to Specific OEM Group 1 Equivalent Tapes:
- 20 PLYSIL 3455
- 3M 70 & 70HDT
- 4529670544 Markel 5970-00-955-9976
- 66N 67N 68N 69N 78N 79N
- Airbus ASNA5107
- Airbus ABS5334
- Amphenol Connector Backshell Clamp Isolation Bushing Tape
- Boeing HS5215E103 / HS5215E203
- Boeing / McDonnel Douglas DMS2186
- Cessna P840154-C4
- Cinch 26482
- Electric Traction Motor Coil Insulation and Connector Junction Tape
- ES7889 Systems & Electronics
- FAR 25.853 Appendix F Tape
- Garmin 249-00114-00
- General Dynamics P5384
- General Electric A50A493 & 3003M70
- General Electric A50E112
- General Electric EMS2074
- General Electric EMD8355873
- ITT CANNON Backshell Clamp Bushing Tape
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
20 PLYSIL 3455 Equivalent Silicone Rubber Self Fusing Electrical Tape
FlameShieldä T-SR-20-3455 is a 20 PLYSIL 3455 equivalent silicone rubber electrical tape. Temperature range 180C or 356F.
3M 70 & 3M 70HDT Self Fusing Silicone Rubber Electrical Tape meeting MIL Specification
FlameShieldä 3M 70 & 3M 70HDT equivalent self-fusing self-amalgamating silicone rubber electrical tapes. Cables with the following composition should be overwrapped: Butyl Rubber, Oil-based rubber, Ethylene Propylene rubber, PVC, low and high density polyethylene.
T-SR-3M70 is a .012" thick rectangular tape and T-SR-3M70HDT is a .020" thick triangular profile tape with guideline.
4529670544 Markel 5970-00-955-9976 Equivalent Electrical Insulating Tape
FlameShieldä Markel 4529670544 equivalent (NSN 5970-00-955-9976) triangular profile silicone rubber electrical insulating tape.
66N 67N 69N 78N 79N Equivalent Silicone Rubber Electrical Insulation Tape
FlameShieldä 66N, 67N, 69N, 78N, 79N equivalent silicone rubber tapes.
Meets the following specifications:
· 66N - NSN 5970-14-467-8824
· 67N - NSN 5970-14-474-7041
A6900W Eaton Weatherhead Equivalent Silicone Elastomer Electrical Insulating Tape
FlameShieldä 6900W equivalent silicone rubber self-fusing compression tapes meet many MIL and commercial specifications.
ASNA 5107-2501 5107-2502 5107-2503 Equivalent Silicone Rubber Electrical Insulation Tape
FlameShieldä ASNA5107 equivalent silicone rubber tapes meet MIL-I-22444 specifications. Available in 3 widths: 5107-2501, 5107-2502, 5107-2503.
Meets the following specifications:
· NSN 5970-01-325-8971 (SA version only), 5970-14-464-7312 (68N) is oxide-red
ABS 5334 Airbus Standard 66N 67N Silicone Rubber Electrical Insulation Tape
FlameShieldä Airbus Standard ABS 5334 (66N & 67N) equivalent silicone rubber tapes meet MIL and commercial specifications.
May also be cross-referenced to:
· 66N - NSN 5970-14-467-8824
· 67N - NSN 5970-14-474-7041
Amphenol Connector Backshell Clamp Isolation Tape/Bushing
FlameShieldä Amphenol connector backshell clamp isolation tape (Garmin 249-00114 equivalent) is a silicone rubber self-fusing self-amalgamating tape meeting MIL and commercial specifications. The tape is used to form bushings to aid in strain relief.
Boeing HS5215E103 / HS5215E203 Silicone Rubber Electrical Insulation Tapes
FlameShieldä tape meeting Boeing HS5215E103 & HS5215E203 specification are used for a variety of critical electrical wiring and cable splicing and protection jobs.
This tape is commonly specified for use on Apache helicopter airframes and has an NSN number assignment of 5330-01-479-4233 / 530-01-479-4235. Alternate P/N for HS5215E103 is RM011875.
DMS2186 Mil Spec McDonnel Douglas / Boeing Equivalent Silicone Rubber Self Fusing Electrical Insulation
FlameShieldä rectangular and triangular profile tapes meeting DMS2186 specification are equivalent and used for a variety of critical electrical wiring and cable splicing and protection jobs.
P840154-C4 Cessna Guideline Silicone Rubber Self Fusing Electrical Tape
FlameShieldä P840154-C4 Cessna guideline equivalent silicone rubber electrical tape is a self-fusing self-amalgamating tape meeting MIL and commercial specifications.
Cinch 26482 Series Connector Backshell Clamp Isolation Tape/Bushing
FlameShieldä Cinch 26482 connector backshell clamp isolation tape (Garmin 249-00114 equivalent) is a silicone rubber self-fusing self-amalgamating tape meeting MIL and commercial specifications.
Locomotive Electric Traction Motor Coil Insulation & Connector Junction Tape
Primary Field Coil Insulation Tape:
- GE 84A210606P154 & GE 84A210606P157; Our part number T-SR-84
- GE 41A239176P70 & GE 41A239176P71; Our part number T-SR-41
- EMD 8205562, EMD 8227441, EMD R718024; Our part number T-SR-82 meets EMS 558 specification
- EMD R718051, EMD R718077, EMD 8220410, EMD 40100391, EMD 8257527; Our part number T-SR-71 meets EMS 558 specification
- GE 21261; Our part number T-SR-21
- GE 84A210606P158; Our part number T-SR-158
Self-fusing Connector Junction Insulation Tape:
- EMD 8355873; Our part number T3020-R004-12 meets GE A50E112, EMS 2074 specification
- EMD 4089227, GE 84A210606P152; Our part number P3272-10R12-P4 meets EMS 2074 specification
ES7889 Systems and Electronics Equivalent Silicone Rubber Self Fusing Electrical Tape
ES7889 rectangular (Type I) and triangular (Type II) profile silicone rubber self-fusing self-amalgamating electrical tapes meet MIL and commercial specifications are used for a variety of critical electrical wiring and cable splicing and protection jobs.
FAA FAR 25.853 Appendix F Meeting Horizontal & Vertical Burn Rate Limits Silicone Rubber Self Fusing Tapes
FlameShieldä rectangular and triangular profile tapes meeting the FAA FAR 25.853 burn rate limit specification are used for a variety of critical electrical wiring and cable splicing and protection jobs.
Garmin 249-00114-00 Silicone Rubber Self Fusing Electrical Tape
FlameShieldä Garmin 249-00114 equvalent silicone rubber self-fusing self-amalgamating tape meets MIL and commercial specification for use in avionics wiring. Popular for protecting wiring at the backshell clamp.
General Dynamics P5384 Silicone Rubber Electrical Insulation Tapes NSN 9320-01-310-3746
FlameShieldä rectangular and triangular profile self-fusing self-amalgamating tapes meeting General Dynamics P5384 specification (NSN 9320-01-310-3746) are used for a variety of critical electrical wiring and cable splicing and protection jobs.
50997 AR 386B FNOK
General Electric Power Generation A50A493 & 3003M70 Silicone Rubber Self Fusing Tapes
FlameShieldä A50A493A, A50A493B, A50A493C, A50A493D, 3003M70P01, 3003M70P02, 3003M70P03 and 3003M70P04 rectangular and triangular profile tapes meeting GE General Electric Power Generation A50A493 & 3003M70 specification.
General Electric Transportation Systems A50E112 Silicone Rubber Self Fusing Tapes
FlameShieldä rectangular profile tapes meeting GE General Electric Transportation Systems A50E112 specification.
General Electric Transportation Systems EMS2074 Silicone Rubber Self Fusing Tapes
FlameShieldä rectangular profile tapes meeting GE General Electric Transportation Systems EMS2074 specification.
General Electric Transportation Systems EMD8355873 Silicone Rubber Self Fusing Tapes
FlameShieldä rectangular profile tapes meeting GE General Electric Transportation Systems EMD 8355873 specification.
ITT Cannon Connector Backshell Clamp Isolation Tape/Bushing
FlameShieldä ITT Cannon connector backshell clamp isolation tape (Garmin 249-00114 equivalent) is a silicone rubber self-fusing self-amalgamating tape meeting MIL and commercial specifications. The tape is used to form bushings to aid in strain relief.